Description

HUSKEY SMP GREASE is a unique high-temperature, extreme pressure, non-melting, non-caking grease designed for extreme service applications. Blended from pure synthetic base oils and thickeners then coupled with the most modern extreme pressure and anti-wear additives to provide a tough, durable lubricating film that protects against metal to metal contact. HUSKEY SMP GREASE is designed to withstand temperatures from -30°F (-34°C) to 530°F (277°C) with intermittent usage to 600°F (318°C).

Usage

HUSKEY SMP GREASE was designed primarily for high-temperature steel mill applications and wet environments but has unsurpassed performance in normal grease applications. Due to its high film strength, anti-wear properties and wide temperature range it may be used in a wide variety of applications found in textile, mining, paper, automotive, agricultural and wood industries.

Package Availability

• Convenient Disposable Gun Loader 14 oz. Cartridges
• 5 gal. Pail
• 15 gal. Keg
• 55 gal. Drum

Typical Properties

The name of this product or group of products is for product identification only. HUSK-ITT CORPORATION makes no warranties, representations or conditions of any kind expressed or implied, whether for merchantability or fitness with respect to these products. The final determination of the suitability of the products for the application contemplated by the user is the sole responsibility of the buyer. HUSK-ITT CORPORATION sales personnel are not authorized to amend this warranty limitation.

Description

HUSKEY TUFF STUFF is a new generation grease designed for today’s demanding industries. It represents the “state of the art” in grease technology, combining the finest base oil stocks, additives and synthetic thickeners available to provide a truly multi-service, friction reducing, non-melting grease with unmatched protection in normal and severe service applications. HUSKEY TUFF STUFF is a blend of the highest quality paraffinic base oils and polymers coupled with HUSKEY’S newest proprietary extreme pressure additive which forms a tough durable film of protection from friction, wear and corrosion over a wider temperature range (-20°F. to 540°F). HUSKEY TUFF STUFF’S unique formulation provides superior adhesion to metal surfaces that does not easily wash off, run out or separate even under adverse conditions of water, steam or dilute chemicals thus providing lower grease consumption and extended lubrication cycles.

Advantages

• WITHSTANDS EXTREME PRESSURES
• WIDE TEMPERATURE RANGE
• EXCELLENT METAL ADHERENCE
• PREVENTS RUST & CORROSION
• REDUCES FRICTION & WEA
• WILL NOT MELT OR RUN OU
• HIGHLY WATER RESISTANT
• REDUCES GREASE INVENTORIES

Usage

HUSKEY TUFF STUFF provides unmatched performance in a wide variety of conventional and severe service applications found in a diverse range of industrial, marine, mining, construction, agricultural and automotive applications. HUSKEY TUFF STUFF is recommended for all roller, sleeve and pillow block bearings, bushings, couplings, universal joints, and sliding surfaces where a multi-purpose or extreme pressure grease is required. The use of HUSKEY TUFF STUFF can allow you to reduce your grease inventory.

Package Availability

• Convenient Disposable Gun Loader 14 oz. Cartridges
• 5 gal. Pail
• 15 gal. Keg
• 55 gal. Drum

Typical Specifications

The name of this product or group of products is for product identification only.  HUSK-ITT Corporation. makes no warranties, representations or conditions of any kind expressed or implied, whether for merchant ability or fitness with respect to these products   The final determination of the suitability of the products for the application contemplated by the user is the sole responsibility of the buyer.  HUSK-ITT Corporation sales personnel are not authorized to amend this warranty limitation.

Description

HUSKEY MP-2 Polyurea Grease is a second generation polyurea grease. This unique new, high performance, multi-purpose grease is based on advanced polyurea technology. It is formulated from pure petroleum base oils then fortified with extreme pressure additives and rust and oxidation inhibitors. HUSKEY MP-2 Polyurea Grease gives longer bearing life under high speed, high temperature and high water applications than most other widely used antifriction bearing greases. The distinctive Green color makes it easy to identify during and after lubrication.

Benefits

• Long life at high temperatures.
• High extreme pressure characteristics.
• Excellent rust protection.
• Excellent water resistance.
• Friendly to copper containing components at high temperature.
• Excellent low temperature properties.
• Environmentally friendly. Contains no heavy metals or chlorine compounds.
• Compatible with many seal materials such as Neoprene, Nitrile, Hytrel and Silicone.
• Recommended for “Sealed for Life” applications.

Usage

HUSKEY MP-2 Polyurea Grease is suited for many demanding jobs in the industrial, agricultural, automotive and off-road equipment. It is designed as a multi-service grease for construction equipment, paper and steel mills, conveyers, die pins, electric motors, high speed antifriction bearings and many other applications that require long lasting lubricant protection.

HUSKEY MP-2 Polyurea Grease is an excellent choice for automotive applications. It is recommended for wheel bearings that must withstand heat generated by disc brakes. It is an ideal chassis and CV joint lubricant because of its low temperature properties, shear stability and water resistance capabilities. HUSKEY MP-2 Polyurea Grease meets NLGI certification GC-LB.

Package Availability

• Convenient Disposable Gun Loader 14 oz. Cartridges
• 5 gal. Pail
• 15 gal. Keg
• 55 gal. Drum

Typical Specifications

The name of this product or group of products is for product identification only.  HUSK-ITT Corporation. makes no warranties, representations or conditions of any kind expressed or implied, whether for merchant ability or fitness with respect to these products   The final determination of the suitability of the products for the application contemplated by the user is the sole responsibility of the buyer.  HUSK-ITT Corporation sales personnel are not authorized to amend this warranty limitation.

Description

HUSKEY HTS-2 MOLY GREASE is a premium quality synthetic high temperature grease fortified with molybdenum disulfide (Moly). Blended completely from pure synthetic base oils and thickeners to provide extended service life and wide temperature ranges. Coupled with the most modern extreme pressure and anti-wear additives it proves an exceptional lubricant for use in industry today. HUSKEY HTS-2 OPERATING RANGE: Base Grease -35°F to 500°F with dry film lubrication to 850°F.

Advantages

• PLATING ACTION – HUSKEY HTS-2 is fortified with sub-micron size Moly particles which impregnate the metal surfaces, improving metal finish and developing a smoother surface, thus lowering friction.
• CLEANLINESS – An outstanding feature of HUSKEY HTS-2 is its lack of carbon residue or tendency to form sludge deposits at high temperature.
• LOW VOLATILITY – HUSKEY HTS-2 maintains a lubricating film at elevated temperatures, thus effecting substantially longer lubrication intervals and reduced lubricant consumption.
• BETTER PROTECTION – HUSKEY HTS-2 is formulated to provide excellent protection against wear, rust, oxidation and corrosion, thus extending equipment life and reducing maintenance costs.

Usage

HUSKEY HTS-2 MOLY GREASE is a truly multi-service lubricant for extended service under extreme conditions. Because of its high film strength, anti-wear action and load-carrying capabilities it may be utilized in a wide variety of applications under severe high and low temperatures. Such applications include bearings in kiln cars, lithograph ovens, heat treating, pumps, motors, conveyors or anywhere severe high or low temperatures may exist.

Package Availability

• Convenient Disposable Gun Loader 15 oz. Cartridges
• 1 gal. Pail
• 5 gal. Pail
• 15 gal. Keg
• 55 gal. Drum

Typical Specifications

The name of this product or group of products is for product identification only. HUSK-ITT CORPORATION makes no warranties, representations or conditions of any kind expressed or implied, whether for merchantability or fitness with respect to these products. The final determination of the suitability of the products for the application contemplated by the user is the sole responsibility of the buyer. HUSK-ITT CORPORATION sales personnel are not authorized to amend this warranty limitation.

Description

HUSKEY HTL-500 ULTRA-LOW GRADE GREASE represents some of the most advanced lubricant technology. It is a versatile, premium quality, synthetic grease fortified with PTFE. Blended completely from pure synthetic base oils, additives and shear stable thickeners to provide maximum equipment protection in extremely low and high temperatures (Operating Range -90° to 420°F). HUSKEY HTL-500 ULTRA-LOW GRADE GREASE is also NSF/U.S.D.A. *H-1 registered and KOSHER approved, which gives it full acceptability for use in all areas where incidental food contact may occur.

Advantages

• NSF/USDA *H-1 REGISTERED
• WATER AND STEAM RESISTANT
• NON-MELTING
  
• NON-STAINING
  
• WIDE TEMPERATURE RANGE
  
• REDUCES FRICTION AND WEAR

*NSF Registration No. 059313

Usage

HUSKEY HTL-500 ULTRA-LOW GRADE GREASE is truly a multi-service lubricant for extended service under extreme low and high conditions. HUSKEY HTL-500 ULTRA-LOW GRADE GREASE has proven to be a problem solving product in a wide variety of industries and applications. Some such applications include: Freezer Door Hinges and Bearings, Oven Bearings and Chains, Pumps, Kilns, Conveyors, etc.

Package Availability

• Convenient Disposable Gun Loader 13 oz. Cartridges
• 1 gal. Pail
• 5 gal. Pail
• 15 gal. Keg
• 55 gal. Drum

Typical Specifications

TEST	RESULTS
N.L.G.I. No.	2
Base Oil Viscosity, cSt @ 40 °CcSt @ 100 °C	17 3.9
Worked Penetration	285
Dropping Point, °F	None
Flash Point, °F	420
Pour Point, °F	-90
Timken OK Load, lbs.	35
NSF International Registered	Kosher Certified

The name of this product or group of products is for product identification only. HUSK-ITT CORPORATION makes no warranties, representations or conditions of any kind expressed or implied, whether for merchantability or fitness with respect to these products. The final determination of the suitability of the products for the application contemplated by the user is the sole responsibility of the buyer. HUSK-ITT CORPORATION sales personnel are not authorized to amend this warranty limitation.

Description

HUSKEY HTL-500 GREASE represents some of the most advanced lubricant technology. It is a versatile, premium quality, synthetic grease fortified with PTFE. Blended completely with pure synthetic base oils, additives and shear stable thickeners to provide maximum equipment protection in extremely high and low temperatures (Operating Range -75° to over 500°F). HUSKEY HTL-500 GREASE is also NSF/ U.S.D.A. H-1 *Registered and KOSHER approved, which gives it full acceptability for use in all areas where incidental food contact may occur.

Advantages

• NSF/ U.S.D.A. H-1 *REGISTERED
• WATER AND STEAM RESISTANT
• NON-MELTING
• KOSHER APPROVED
  
• NON-STAINING
  
• WIDE TEMPERATURE RANGE
  
• REDUCES FRICTION AND WEAR
  
• FORTIFIED WITH PTFE

*NSF H-1 Registration No. 059312

Usage

HUSKEY HTL-500 GREASE is truly a multi-service lubricant for extended service under extreme high and low conditions. HUSKEY HTL-500 GREASE has proven to be a problem solving product in a wide variety of industries and applications. Some such applications include: Freezer bearings, oven bearings and chains, pumps, kilns, conveyors, etc.

Package Availability

• Convenient Disposable Gun Loader 13 oz. Cartridges
• 1 gal. Pail
• 5 gal. Pail
• 15 gal. Keg
• 55 gal. Drum

Typical Specifications

TEST	ASTM TEST	RESULTS
N.L.G.I. Grade		2
Worked Penetration 60 Strokes 10,000 Strokes	D-217 D-217	265 295
Base Oils Viscosity, SUS @ 100°F SUS @ 210°F cSt @ 40°C cSt @ 100°C	D-445 D-445 D-445 D-445	240 53 47 7.9
Pour Point, °F	D-97	-75
Flash Point, °F	D-92	510
Dropping Point,°F	D-566	None
Oil Separation, % Loss	D-1742	0.0
Corrosion Preventative Test	D-1743	PASS
Four Ball Wear Scar, mm (40 Kg. 1 hr. @ 1200 rpm, 75°C)	D-2266	0.45
Four Ball E.P. Wear Load Wear Index, Kg Weld Point, Kg	D-2596 D-2596	30.6 160
NSF International Registered		Kosher Certified

The name of this product or group of products is for product identification only. HUSK-ITT CORPORATION makes no warranties, representations or conditions of any kind expressed or implied, whether for merchantability or fitness with respect to these products. The final determination of the suitability of the products for the application contemplated by the user is the sole responsibility of the buyer. HUSK-ITT CORPORATION sales personnel are not authorized to amend this warranty limitation.

Description

HUSKEY ECO-LUBE EP 2 is a blend of the finest quality USA grown natural seed oils available then treated with the most effective anti-oxidants, extreme pressure, anti-wear and anti-corrosion additives. PTFE is added to further enhance load capacity, and reduce friction. This unique blend, together with its synthetic shear stable thickening system, provides the maximum protection against friction, wear and corrosion. HUSKEY ECO-LUBE EP 2 GREASE is readily biodegradable and contains no ozone depleting chemicals, SARA Title 313 chemicals, heavy metals, greenhouse gases, chlorine, phenols, VOC’s or Prop. 65 Chemicals. HUSKEY ECO-LUBE EP 2 is also NSF/U.S.D.A. H-1 *Registered and KOSHER approved, which gives it full acceptability for use in ALL areas where incidental food or potable water contact may occur. HUSKEY ECO-LUBE EP 2 is the ultimate “Green” Grease.

Advantages

• REDUCES FRICTION & WEAR
• WIDE TEMPERATURE RANGE 
• READILY BIODEGRADABLE 
• RENEWABLE RESOURCE BASED
• NSF/U.S.D.A H-1 *REGISTERED
• ADVANCED RUST AND CORROSION PROTECTION 
• KOSHER APPROVED
• FORMULATED WITH PTFE
• NON MELTING

Usage

HUSKEY ECO-LUBE EP 2 is a truly multi-service grease for extended service under extremely high and low temperature conditions from -20°F to 500°F. HUSKEY ECO-LUBE EP 2 has proven to be a problem solving lubricant in a wide variety of industries and applications. Some such applications include all roller, sleeve and pillow block bearings, bushings, couplings, universal joints, and sliding surfaces where a multi-purpose or extreme pressure grease is required.

Package Availability

• Convenient Disposable Gun Loader 14 oz. Cartridges
• 5 gal. Pail
• 15 gal. Keg
• 55 gal. Drum

Typical Specifications

Test	ASTM Test Method	Typical Results
N.L.G.L.Grade		2
Worked Penetration, 60 Strokes	D-217	265 – 295
Dropping Point, °F	D-566	None
Base Oils Viscosity, cSt @ 40°C cSt @ 100°C	D-445 D-445	35.8 8.6
Viscosity Index	D-2270	203
Flash Point	D-92	520
Pour Point °F	D-97	-20
Corrosion Preventative Test	D-1743	Pass
Water Washout, %Loss	D-1264	0.57
4-Ball Wear Scar (75°C, 40 Kg, 1 hr.@ 1200 rpm)	D-2266	0.4
Falex Pin and “V” Block, Pass Lbs.	D-3233A (Modified)	3000
NSF International Registered		Kosher Certified

* NSF H-1 Registration No. 142968

The name of this product or group of products is for product identification only.  HUSK-ITT Corporation. makes no warranties, representations or conditions of any kind expressed or implied, whether for merchant ability or fitness with respect to these products   The final determination of the suitability of the products for the application contemplated by the user is the sole responsibility of the buyer.  HUSK-ITT Corporation sales personnel are not authorized to amend this warranty limitation.

Description

HUSKEY COOLUBE 65 is a high performance, low temperature grease designed for high speeds and moderate loads. HUSKEY COOLUBE 65 is blended from the highest quality petroleum base stocks and selectively treated with rust, oxidation and anti-wear additives coupled with an extremely shear stable thickener system.

Advantages

• WIDE TEMPERATURE RANGE
• EXCELLENT FOR HIGH SPEEDS
• EXTREMELY RESISTANT TO WATER
  
• PREVENTS RUST AND CORROSION
  
• EXTREME PRESSURE RESISTANT
  
• REDUCES FRICTION AND WEAR

Meets the Requirements of Mil –PRF-10924 C&D and Ford WSB-M1C163-D

Usage

HUSKEY COOLUBE 65 was designed to provide excellent lubrication, wet or dry, over a wide temperature range (-65°F to 250°F.) in a large variety of industries, including textile, food processing, agriculture, automotive, etc. HUSKEY COOLUBE 65 meets the performance requirements of MIL-G-10924C and MIL-G-10924D. COOLUBE 65 is recommended for all bearing surfaces including fan bearings, spindles, freezer bearings, electric tools, slides, conveyors, etc.

Package Availability

• Convenient Disposable Gun Loader 14 oz. Cartridges
• 1 gal. Pail
• 5 gal. Pail
• 15 gal. Keg
• 55 gal. Drum

Typical Specifications

The name of this product or group of products is for product identification only. HUSK-ITT CORPORATION makes no warranties, representations or conditions of any kind expressed or implied, whether for merchantability or fitness with respect to these products. The final determination of the suitability of the products for the application contemplated by the user is the sole responsibility of the buyer. HUSK-ITT CORPORATION sales personnel are not authorized to amend this warranty limitation.